|
|
|
|
World-famous Dynafile II replaces tedious hand filing and sanding. New lightweight, low profile version is perfect for working in tight areas. Grind, deburr, blend, polish, finish and more! Dynafile II grinding head pivots 360 degrees for securing in most efficient position. Grind from contact wheel or platen pad. Finish and polish using slack of belt. Perfect for the deburring and finsihing of hand rails, tube welds, and hard to reach places.
40353 model is designed for exclusive use with non-woven belts. Excellent for setting grain lines, achieving consistent satin finishes on metals, removing oxide and weld discoloration.
- Belt Size Inches (mm): 1/8-3/4 in. (3-19) W x 18 in. (457) L
- hp (W): 0.4 (298)
- Style: 7 Degree Offset
- Free Speed (RPM): 25000
- SFPM (SMPM): 5730 (1747)
- Exhaust Type: Front
- Max. Air Flow @ 90 PSIG: SCFM (LPM): 22 (626)
- Length Inch (mm): 14 (356)
- Height Inch (mm): 4-1/8 (105)
- Weight Pound (kg): 1.9 (8.7)
- Packaged Weight (lbs): 2.6
One Year Tool Warranty- Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal performance. Normally wearable parts such as bearings, contact wheels, rotor blades, etc., are not covered under this warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- 40375 Rubber Drive Wheel minimizes non-woven nylon belt slippage.
- .4 hp Dynafile® II adds a lightweight, compact variation to Dynabrade’s famous Abrasive Belt Tool line. The optimal low profile belt tool for working in tight areas! Grind, deburr, blend, finish and polish.
- Grind from contact wheel or platen pad; finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, glass and more. Compact, low profile housing allows easy access in tight spots and previously inaccessible areas. Grinding head pivots 360° for additional flexibility. Ergonomic 7° offset handle.
- Robust .4 hp air motor serves up ample power. Lightweight tool design minimizes operator fatigue and increases efficiency. Belt guard easily detaches for quick abrasive change; simplebelt tracking adjustment knob.
- Includes 11203 Contact Arm, for non-woven abrasive belts 1/2" wide x 18" long
|
|
|
|
|
|
|
|
|