 |
 |
 |
|
THIS TOOL HAS BEEN DISCONTINUED. REPLACED BY PART # DYS1New 11 Amp model #51585 replaces old 7 Amp model #13415. Portable electric Dynisher, perfect for on site refinishing of stainless steel. Excellent for blending and finishing stainless steel and other metals. leaving that perfect "in-line" scratch pattern. Great for refinishing stainless steel sinks and kitchen counter tops. Uses tire mounted coated & non-woven abrasive belts. 0 - 3,000 RPM, 120 Volt. Uses 3 1/2" x 15 1/2" Abrasive Belts.
*Dynabrade 92938 pneumatic tire sold separately.
Available in the accessories section -->
The Electric Dynisher in action!
- Current (A): 11
- Free Speed (RPM): 0-3000
- Volts AC (V): 120
- Tool Spindle Thread: 5/8 in. - 11 Male
- Arbor Dia. (mm): 3/4 in. (19)
- 1: 1
- Frequency (Hz): 60
One Year Tool Warranty- Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal performance. Normally wearable parts such as bearings, contact wheels, rotor blades, etc., are not covered under this warranty.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Ideal for graining, blending, brushing and polishing. It is utilized in a variety of industries, on stainless steel and other metals, as well as plastic, composites and more.
- Variable tool speed of 0 - 3,000 RPM. Operator can pre-select speed to suit each application. Electronic module maintains specified tool speed under load. Variable speed trigger allows operator to control speed from 0 to selected setting.
- Operator moves tool in easy front-to-back motion, for achieving in-line scratch pattern. Tool guard is adjustable for most efficient use.
- 5/8 in.-11 spindle and 3/4 in. arbor allow mounting of a variety of accessories and abrasives. Tool accepts optional Dynacushion Pneumatic Wheels and Non-Woven Nylon Wheels. Great versatility!
- Strong 835-watt power output gets the job done fast!
|
|
|
|
|
|
|
|
|
