Join our mailing list to receive special offers
Dynabrade 92938 Dynacushion Pneumatic Wheel
For all Dynabrade tools with the 13071 combo arbor.
Usually Ships in 24 Hours
Standard 5" diameter x 3 1/2" wide composite wheel and rubber tire for all Dynabrade tools with the 13071 combo arbor (such as the Dynisher and Dynastraight models). Comes with inflation tool.
Uses 3 1/2" x 15 1/2" Abrasive Belts
*When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over inflating the wheel can lead to "chatter marks" on the surface.
(92938 pneumatic wheel shown on 13501 Dynastraight)
Abrasive belt size: 3 1/2" x 15 1/2"
Tire: 1/8" thick natural rubber, 65 durometer rubber
Max RPM: 3500
Arbor Dia.: Universal 1/2", 5/8", or 3/4" bore
Weight (lbs): 0.8
Packaged Weight (lbs): 0.8
One Year Tool Warranty
- Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal performance. Normally wearable parts such as bearings, contact wheels, rotor blades, etc., are not covered under this warranty.
For finishing and blending a variety of metals.
1/8" thick natural rubber tire.
Lightweight composite wheel.
Universal arbor fits tools with 1/2", 5/8", 3/4" bore.
Dynabrade 94407 Dynaswivel Air Line Connector 1/4"
Dynabrade 95734 Dynaswivel Air Line Connector 1/4"
Dynabrade 13501 Dynastraight Finishing Tool 1 HP
Share your knowledge of this product with other customers...
Be the first to write a review
Terms & Conditions
Copyright © 2007 Abrasive Supply Corporation. All Rights Reserved.