 |
 |
 |
|
Precision Deburring and Finishing on a Variety of Surfaces. An ideal tool for use in casting houses, effective on cast parts of aluminum, bronze and brass. Attach carbide burrs, rotary files, mounted points, wheels and discs. Quickly and efficiently removes gates and parting lines in cast parts. Adjustable speed from 5,000 RPM to 25,000 RPM.
- Collet Size Inch: 1/8
- Motor RPM: 25,000
- Motor Characteristics: Rotary Vane Air Motor
- hp (W): 0.3 (224)
- Exhaust Type: Rear
- Max. Air Flow @ 90 PSIG: SCFM (LPM): 20 (566)
- Hose I.D. Inch (mm): 1/4 (6)
- Length Inch (mm): 5.66 (144)
- Diameter Inch (mm): 1-1/2 (39)
- Weight (lbs): 1.2
- Packaged Weight (lbs): 2
One Year Tool Warranty- Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal performance. Normally wearable parts such as bearings, contact wheels, rotor blades, etc., are not covered under this warranty.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Precision Deburring and Finishing on a Variety of Surfaces. An ideal tool for use in casting houses, effective on cast parts of aluminum, bronze and brass. Quickly and efficiently removes gates and parting lines in cast parts.
- High-efficiency rotary vane air motor. Adjustable tool speed from 5,000 RPM to 25,000 RPM. Operate tool and adjust speed by simply rotating rear black cover.
- Tactile grip on shaft end allows fingertip control, and alerts operator to rotating collet area.
- Changing of attachment is achieved with easy, two-wrench maneuver.
- Unique housing shape allows tool to be held as a traditional Die Grinder. Optional Thread Guard (52898) allows easy access to collet cap. With Thread Guard in place, larger diameter accessories may be run by tool. (All accessories must have maximum operating speed of 25,000 RPM).
|
|
|
|
|
|
|
|
|
